Frequently Asked Questions - PS Worldwide CAD

Are you looking to outsource your engineering services to a service provider who is capable of delivering the work as per your expectations? Not sure where to start from or how to get started with the process? Well, if that is so, you are in the right place. PS Worldwide CAD is your one-stop provider where you will get solutions for all services on one single roof.

• How can I get in touch with PS Worldwide CAD Consultants to outsource my engineering project?
  • You can connect with us over the call, or via email, or can fill up the inquiry form and the team will get back to you within 24 to 48 business hours.
• What years of experience do you have in providing support for engineering services?
  • PS Worldwide CAD Consultants has experience for over 13 years in providing full-fledged engineering services to its clients globally.
• Which are the different domains or types of engineering services you provide or have expertise in it?
  • We have a wide range of services and have expertise in
  • Architectural
  • Mechanical
  • Electrical
  • Civil
  • Structural
  • CAD Services
• What do the engineers do?
  • Post receiving the details from the client, our engineers initiate the process to review the inputs shared and prepare the list of work that needs to be taken care of.
• As a part of the Architectural Engineering Service, what are the different types of solutions offered by you?
  • Here is the list of services catered by us that is part of architectural engineering services
  • 3D Rendering
  • 3D Animation
  • Drafting and Detailing
  • Architectural Walkthrough
  • Building Information Modeling
  • Architectural Planning
• What inputs are required for Outsourcing Architectural Engineering Services?
  • Below mentioned is the input list that we would be required to understand the work as well as proceeding further with the work.
  • Hand-drawn Sketches
  • Reference PDF
  • Reference CAD
• What are the types of solutions provided in Civil Engineering Services?
  • Listed are the solutions that are part of Civil Engineering Services
  • 2D Drafting Engineering
  • Civil Engineering Research
  • Civil Engineering Designs
  • MEP Design and Drafting
  • Construction Cost Estimation
  • Paper to CAD Conversion
  • Analytical Engineering Services
  • Construction Drawing
• What are the inputs required for Outsourcing Civil Engineering Services?
  • Below mentioned is the input list that we would be required to understand the work as well as proceeding further with the work.
  • Hand-drawn Sketches
  • Reference PDF
  • Reference CAD
• What are the different types of Electrical Engineering Services provided by you?
  • Listed are the solutions that are part of Electrical Engineering Services
  • Electrical Load Calculation
  • Panel and Switchboard Design
  • Electrical System Design
  • Electrical substation layout
  • Floorwise Lighting Layouts
  • Electrical Network Wiring
• What inputs do I have to share for Outsourcing Electrical Engineering Services?
  • Below mentioned is the input list that we would be required to understand the work as well as proceeding further with the work.
  • Hand-drawn Sketches
  • Reference PDF
  • Reference CAD
• Which are the different types of Mechanical Engineering Services offered by you?
  • Listed are the solutions that are part of Mechanical Engineering Services
  • 2D Mechanical Drafting
  • Reverse Engineering Services
  • 3D Mechanical Drafting
  • 3D Modeling and Rendering
  • Mechanical BIM Services
  • CAD Conversion and Migration
• What inputs are required for Outsourcing Mechanical Engineering Services?
  • Below mentioned is the input list that we would be required to understand the work as well as proceeding further with the work.
  • Hand-drawn Sketches
  • Reference PDF
  • Reference CAD
• Do you provide solutions for Structural Engineering Services? What are they?
  • Yes, we do provide Structural Engineering services. Mentioned in the list of the services.
  • Industrial Structures Design & Analysis
  • Retrofitting & Rehabilitation of Structures
  • Peer Review Services
  • High Rise Structures Design & Analysis
  • Custom Design & Analysis
  • Finite Element Modeling & Analysis
• What inputs need to be shared for outsourcing Structural Engineering Services?
  • Below mentioned is the input list that we would be required to understand the work as well as proceeding further with the work.
  • Hand-drawn Sketches
  • Reference PDF
  • Reference CAD
• Do you provide assistance in BIM Services?
  • Yes, we have a team of well-trained and experienced BIM modelers, BIM engineers, designers, and drafters.
• What data or information or Level of Detail is required for Outsourcing BIM Services?
  • The input or the set of information that the clients need to share with us is,
  • IFC (Issue for construction drawings )
• Do you provide assistance in MEP Services and HVAC Services?
  • Yes, our expertise is in delivering data-driven and result-oriented MEP services and HVAC services.
• What data or information is required for Outsourcing MEP Services and HVAC Services?
  • The input or the set of information that the clients need to share with us is,
  • IFC (Issue for construction drawings )
• Can I only outsource my work for getting Shop Drawings Services?
  • Indeed Yes!! You can outsource shop drawing services, regardless it is for engineering services or any other services.
• What inputs are required for Outsourcing Detailing Services?
  • The input or the set of information that the clients need to share with us is,
  • IFC (Issue for construction drawings)
• What are the different types of Shop Drawings Services offered by you?
  • We provide major all types of shop drawings services to our clients based on the need and requirement of the project. Some of them are listed below.
  • Architectural Shop Drawing
  • HVAC Duct Shop Drawing
  • CAD Shop Drawing
  • Sheet Metal Shop Drawing
  • MEP Shop Drawing
  • Steel Fabrication Shop Drawing
  • BIM Shop Drawing
  • Structural Shop Drawing
• Do you provide solutions for Detailing Services? What are they?
  • Yes, we do have expertise in providing detailing services to our clients. Listed are the detailing services.
  • Structural Steel Detailing Service
  • Curtain Wall Detailing Service
  • Precast Panel Detailing Services
  • Reinforcement Detailing Service
  • Rebar Detailing Service
• Is there any option available to get a free trial for the work?
  • Yes, we do provide the option of giving free trials to our clients for the pilot project and that is up to 10 hours.
  • Make initial payment so as to start up the work. You can make a payment of 25% of the overall project value.
• Is PS Worldwide CAD Consultants , well-equipped with the use of the latest tools, standards, and software?
  • Yes, the company is well-equipped with the use of the latest tools, standards, and software.
• Do you have any infrastructure to provide engineering solutions?
  • Yes, we have owned the infrastructure where the design and drawings are developed.
• How you ensure to keep the confidentiality of my (clients’) engineering work?
  • The data is stored in the server and the access to view that information is only with us or our clients post the project is complete.
• What necessary steps are taken into consideration to ensure the qualitative work of the engineering project?
  • We follow strict quality assurance processes to make sure that we deliver high-quality engineering services to our customers.
• How can I get my work started?
  • To get the work started clients need to follow the below-mentioned stages.
  • Input Review
  • Hours and Cost estimation
  • Pricing proposal
  • Quote Approval and PO receipt
• How can I communicate with the staff at PS Worldwide CAD Consultants ?
  • There is a SPOC ( Single Point of Contact) person assigned by the company for communication purpose. Their official email id and contact details are being shared for an easy mode of communication.
• Will I get access and a detailed report for my work? How? And Can I share my feedback at the same time when the work is in progress?
  • Yes, we provide full access to the detailed report online so that the client can review their work and share their review over it at the same time when the work is in progress.
• What different types of software and international standards are used by the engineers at PS Worldwide CAD Consultants
  • Based on the requirement of the project the team here uses the set of software and defined international standards.
• How can I send my input files to PS Worldwide CAD Consultants for receiving the quotes for the services?
  • You can send us the design and drawings via FTP, we transfer link, google drive link, TIF, and DWG, PDF files, png, or jpeg forms.
• How can I explain my project requirement to the team, since the company is based in India?
  • You can always contact us over the phone, email, or via skype call.
• What is the TAT to get a response or an answer to my query or inquiry?
  • Once the marketing team receives an inquiry, the TAT is within 24-48 hours.
• 35. What is the expected turnaround time for the project handover?
  • The delivery time of the project or the work is totally depending on the size of the project.
• Do you adhere to follow the process to have an accurate quality check for the drawings or the work before submitting it to the clients?
  • Yes, we follow a strict process for having a proper quality check of the drawings and designs before submitting them to the clients.
• Does your service is only limited in India? Or worldwide?
  • Our office is located in 6 countries
  • India
  • Australia
  • USA
  • New Zealand
  • UK
  • UAE
• What are the charges for the project? Or How is the billing process taken care of?
  • The overall budget or the cost of the project is depending on the nature of the project and the work.
  • The charges are depending on the nature of the work and the need for the project work. It can be either in the form of the hourly base, quarterly, or on an advance basis.
• Can we get some of the referrals of your existing clients?
  • You can check online the testimonials and feedback shared by our clients online.
• Do you have any option to sign NDA or Agreement?
  • The whole and sole decision lie on the client’s end. If they need to sign an NDA copy, we do the needful and have the signing of the NDA initiated.
• How can I make payments?
  • You can make payment via online transfer, wire transfer, Credit Card, or PayPal.
• Why should I outsource my project to PS Worldwide CAD Consultants ?
  • Different types of engineering and CAD services available on one single roof.
  • The costing, as well as pricing of the project, is less than 1/3rd of the international cost.
  • Having manpower of more than 150+ staff
  • Experience for over 13 years
  • A dedicated team of experts allotted for every project.
  • More than 2500+ happy clients.
  • Completed more than 11000+ projects globally.